Connect external devices with the touch function

This image has an empty alt attribute; its file name is image-18.png


Connection via HDMI

  1. Connect the HDMI cable connected to the external device to the HDMI IN port on the ViewBoard.
  2. To use the touch and device control function directly from the ViewBoard, connect the USB cable connected to the external device to the TOUCH1 port of the ViewBoard.

Connection via VGA

  1. Connect the VGA cable connected to the external device to the ViewBoard's VGA port.
  2. To use the touch function and control of the device directly from the ViewBoard, connect the USB cable connected to the external device to the TOUCH2 port of the ViewBoard.



Quest'articolo ti è stato utile?

Articoli inerenti

Direct connection (via cable) to the interactive whiteboard

Purpose of the guide This guide explains how to use the ViewSonic as a projector ...

Interactive pen functionality

Purpose of the guide This guide explains the various pen functions found on the V...

Adjust the height of the whiteboard

Set the height of the whiteboard This guide explains how to raise / lower the int...

White board activation

Purpose of the guide This guide explains how to activate the white board of the V...